Guide :Optics : (12x36) IS II Binocular

12x36 only one eyepiece focus

My Canon 12x36 IS 5.6" binoculars has two problems. When focusing, only one eyepiece moves (the right one). Also, when activating the image stabilization, only a loud buzzing can be heard but the image is not stabilized. Can anything be done with this unit?

Research, Knowledge and Information :

questions about the Canon 15x50 IS - Cloudy Nights Home

questions about the Canon 15x50 IS - posted ... It has two UD/ED elements on each side, one in the eyepiece ... The 15x50 only has two elements in the objective ...
Read More At :

Canon 12x36 IS II Image Stabilized Binocular | Binoculars ...

Free shipping is for the 48 Contiguous States only ... All Canon binoculars feature a center focus for easy one ... Canon 12x36 IS II Image Stabilized Binocular
Read More At :


through the right eyepiece. If the object is in focus, ... binoculars. The only difference is that, ... Brightness varies from one model of binoculars to another.
Read More At :

Canon 12x36 Image Stabilization III Binoculars -

All Canon binoculars feature a center focus for easy one-handed operation, and the 12x36 IS II ... algorithms not only ... and the eyepiece use ...

Help with Use and Adjust Binoculars - Zen-Ray Optics- Birding ...

Help with Use and Adjust Binoculars; ... The Adjustable Eyepiece is the one that TURNS and it ... Don't touch the Central Focus . You are now looking through only the ...
Read More At :

Canon Image Stabilized (IS) Binoculars - BirdForum

But when I saw the new Canon 12x36 IS II bins ... The only problem seems to be a closest focus of 6 ... and a proper eyepiece rainguard (same source, only one I ...
Read More At :

Technology Binoculars - Home - Canon UK -

Technology Binoculars: ... The majority of binoculars sold today use convex lenses for both the objective lens and eyepiece lens. ... Do you see only one image or two?
Read More At :

Suggested Questions And Answer :

12x36 only one eyepiece focus

Assuming you have already tried replacing the battery, contact Canon Service Dept.
Read More At : (12x36) IS II Binocular...

The focus between the two lenses is not synchronized; when I zero the eyepiece lenses and try to use the center wheel to focus, I can only get one clear image at a time.

Here's how: Focus the left side first. Close your left eye and now rotate the right hand eyepiece (dioptre ring) until the right hand side is clearly focused. Open both eyes! Surprise! both sides should now be in focus simultaneously!!
Read More At : Action Binocular...

My left eyepiece on my Zhumell 20X80 will not turn to allow me to focus it. The right one works just fine. I don't want to force the left eye piece. Is there a locking mechanism I'm not aware of? Is this defective? Dave

Typically the left eye piece is not adjustable. You focus the left eye with the center adjustment and then focus the right eye with the eye piece adjuster. I hope this helps.
Read More At : SuperGiant Astronomical Binocular...

I have an elderly (estimated age of 47 years) Omega binocular # 4686, 30X50 Extra Wide Angle, that the lead screw for the focus has broken at the eyepiece adjustment bracket. I would like to get it reparied. A replacement part should be enough. Is there a source for the part? In the worst case, a mechanical drawing of the part would allow a machinest to fashion one for me.

So i have a better understanding of the part you require. do you mean the finger adjustment screw that you use to focus with ? robert
Read More At : Omega...

I bought a skyquest xt10i telescope and am trying

A star is always just a point of light no matter what magnification you use! If you are seeing a "disk" when you focus on a star you are NOT focused! Make it a tiny dot.Why not try focusing on the moon or Mars and Saturn. You will always need to re=focus slightly when you move to another sky object.
Read More At : SkyQuest XT10 (600 x 254mm) Telescope...

Binoculers do not appear to be focussing properly.

Binox have a prism in each barrel to invert the image. When dropped or banged around the prisms may move in their mounts creating the problem you present. I have opened binox and reset the prism effecting a correction, but IF you unit is nitrogen filled you will be losing that anti-fogging benefit. If you choose to open your pair, check for movement in each prism, neither should be loose. Once you find the original proper placement, a drop of crazy glue does wonders - just a drop on one edge.
Read More At : Optics...

PENTAX 8X40 PCF WP II BINOCULARS: The right eyepiece covers (2) fall off and on now very easily. The adjusting wheel does not control the rough focus of the right eyepiece. There are 2 small holes in the exposed eyepiece where there might have been some 'pins'. (My guess.) When I hold a pin in the hole the central control wheel does move the right lens and adjusts the rough focus.

The right lens is also controlled (overridden) by the diopter focus ring. may take both pins to repair.
Read More At : PCF WP II (8x40) Binocular...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0358 seconds