Guide :Optics : Yukon NVRS Titanium 2.5x42 Night Vision Rifle Scope Gen 2+,...

Name of scope . Yukon . Problem : I tried to replace a battery in the dark. Removed the wrong part by relative force . Scope damaged. Two tubes on the front of the scope one is the battery tube and th

Name of scope . Yukon . Problem : I tried to replace a battery in the dark. Removed the wrong part by relative force . Scope damaged. Two tubes on the front of the scope one is the battery tube and the second is the one which was broken off has two wires which were broken off and is optical on the end with a lens. Help can this be repaired? Yukon night vision scope titanium 2.5 x 42 Help can this be repaired?

Research, Knowledge and Information :

bstrandable NCLEX Neurologic System 1 of 2 - Quizlet

Combination of sets from all over quizlet, ... An auto mechanic accidentally has battery acid splashed in his eyes. ... All at one time. 3. Two hours before mealtime. 4.
Read More At :

Teardown Confirms Samsung's Refurbished Note 7 Has a Smaller ...

Teardown Confirms Samsung's Refurbished Note 7 Has a Smaller, ... >One phone per million has a problem ... The battery can be removed without first ousting the ...
Read More At :

Optical sights - CHUCKHAWKS.COM

The selection of both telescopic and red dot sights has ... I tried to solve the problem by ... a $1500+ Swarovski scope whose one-piece 30mm tube is machined ...
Read More At :

At This Point, Amazon Can Crush a Company Just By Filing for ...

But no one has been as hard hit as ... They weren’t patent trolling, just reserving a name for ... And even when you don’t want a full replacement they generally ...

Health Questions including "If you are taking ... -

Health Questions including "If you are taking Yasmine could stomach problems be symptoms of pregnancy" and "How long should a parent allow their child to experience ...
Read More At :

Twitter Adds More Muting Options to Help Keep Abusive ...

You can also watch Billy Eichner play the part of an aspiring ... about two bitter friends trying to ... Hercules and Mulan will be removed from the streaming ...
Read More At :

Science Enhanced S&S Biology - VDOE

An optional extension is to have at least one part function to model a ... and to replace lost or damaged ... Shake a stoppered test tube containing one sample ...
Read More At :

HD1960MM1 - lanbob

One way is to use a battery to run a motor ... a small tube squirting oil at two small holes; one of which would cause ... used to replace vacuum tubes.
Read More At :

For Small Treated Public Water Systems in Alaska

For Small Treated Public Water Systems ... one of two things can happen. ... replace if damaged • Replace and tighten the housing or
Read More At :

Loran History - USCG

One part of the upgrade was almost perpendicular and the ... Got a slight headache from too much scope work. ... one or two have been tossed in the ...
Read More At :

Suggested Questions And Answer :

Name of scope . Yukon . Problem : I tried to replace a battery in the dark. Removed the wrong part by relative force . Scope damaged. Two tubes on the front of the scope one is the battery tube and th

I would strip the wires as carefully as I could and get them back together, get the 2 AA batteries back in there, and see what happens. Then go about making a permanent splice in the wires and getting the lens to stay on there, or ship it back to Russia for repairs. Or find somebody to do it. I'm sure it can be done. Hope this helps.
Read More At : Yukon NVRS Titanium 2.5x42 Night Vision Rifle Scope Gen 2+,......

My New 12? Meade LX200 ACF GPS telescope does not have the two screw?s in the front and the rear of the top of the main optical tube for mounting a dovetail plate to the top center or does it have screws on the right side for mounting the finder scope on ether side like my 10? and 8? scopes had. There is only one screw in the front and back located in the optical tube not the soiled black main back or the soiled black corrector plate ring in the front. Is this the way they are making them now or is this a manufacture mistake, because if this is so you will not even be able to mount Meade?s dovetail mounting plate for all the mounting plates I have researched all have to have two screws that go all the way through the plate and the curved mounting blocks ion to the scopes front and back. If you know anything about this I would like to know because Meade does not even know the anser. Thanks, Laurence

You may need to mount just a rail like this one: can call Meade directly and ask:
Read More At : LX200GPS Telescope...

Will nikon replace scope tube on buckmaster 3x9x40

Call customer service and find out. They should have a toll free number. Email might work as well.
Read More At : ® Buckmaster® Rifle Scope - 3-9 x 40 mm Silver Shadow...

Airsoft battery busted

New battery is all i suggest , you really screwed it up it probally wont work but if it does it will eventually blow up on you as it is not discharging properly, but there cheap if there locally available. So just get a new one and dont play with the wires next time and get a proper airsoft gun.
Read More At : Fully Automatic Electric M4a1 Airsoft Rifle W/flash, Scope......

I just bought a rifle with one on it. exactly how

The adjustment on the front eye PC is your zoom. for your wind edge you have a series of numbers. some scopes differ some read 5,10,15,etc some read 1,2,3,4 etc, the # are estimated wind speed,left or right.if the wind isn't blowing set it on 0. for your elevation you will have a series of #'s 50,75,100,etc.this is your yard edge sight it in at 75 yrd's and if what your shooting at is 100 yards just turn the knob to the correct setting.good luck
Read More At : Bausch & Lomb Hunting Elite 4200 Riflescopes Matte Finish......

After alignmentment, scope points backwards

If you can RESET the hand controller do it-- then re-enter TIME, DATE, and SITE. Make sure you are in ALT AZ Mode and NOT Polar Mode if you do not have a wedge. This is probably the issue-- you are in POLAR MODE by
Read More At : Ultima 2000 -- 8 Telescope...

I have a broken elevation spindle, the little aluminum casting that passes through the plastic driven gear and ultimately ends in 4 tapped holes that the sleeve bolts to that holds the optical tube. We tried to repair this with JB Weld Epoxy, and it held for one night, but it broke again when moving the scope. Is a replacement spindle casting available from any source? Although I am an engineer, and if money were no object, I could probably reverse engineer this part, produce a blueprint from many careful measurements, go to a foundry, and have a new one cast (or drop forged) in stainless steel, it would cost many times more than the telescope itself, and for that price I could just get a much bigger scope with a far more rugged mount. The original damage happened when the motorized mount was in a duffel bag that someone knocked off the tailgate of a pickup. It fell about 3 feet and impacted on hard rocky terrain. Visually it appeared to be undamaged until the weight of the tube was applied, then it was obvious something had broken. I have some pictures of the part and exactly where it goes if it has a different name than what I described. So i need a good part number for this part, a valid address and price and delivery information to order one from. If someone has built an aftermarket one from something like stainless steel or similar stronger material, so much the better, as it might also stiffen the scope and reduce vibration and oscillation when one bumps the eyepiece while observing.

Meade "MAY" sell you the part? Usually they want you to send the scope back. Call customer service: is also a problem on the ETX model scopes. There are some ingenious fixes posted on the Mighty ETX web site.Here: Bassically bolts, washers and nuts.Search the web site for Broken DEC knob.
Read More At : DS-2114 ATS (325 x 114mm) Telescope...

I have a Bushnell Elite 4200 6x24x40 rifle scope 42-6242M

First is to try for a group, do not adjust the scope in any way. Shoot 4 rounds with out adjusting the scope. The gun should settle down and start to group. If you can not get a group in 6 rounds go clean that gun & check your ammo. Start over. If she does not group, its the gun not the scope. Once it starts to group move the cross hairs in the opp direction small clicks and "TAP' the scope after each adjustment. Shoot for a group each time 2 rounds should group. Get a target that has a grid to help get on faster. 
Read More At : Elite 4200 6-24x40 Riflescope w/Adjustable Objective...

Tasco Rifle scope repairs

Try calling Customer Service at 1-800-423-3537. They should be able to assist you with your needs.
Read More At : CONQUEST 3-9X40 MATTE Z PLEX...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0936 seconds