Guide :Optics : ImageView 111025 Binocular

Installing drivers I just bought the Bushnell imageview 11-1025 and tried to install the drivers. My notebook use Microsoft Vista and I received the message: "not enough storage is available to complete this operation" while I'm sure that I have more than enough storage available. I tried to download also from the internet but cannot find it... Please help me.

Posted by pjmk on Jul 04, 2008

Research, Knowledge and Information :


db



3.26



HP Pavilion M6 1025 have problem with random blue ...


For about 3 months my notebook Pavilion M6 have ... Could somebody help me with my problem?Here come's also ... Hp Pavilion Dv7-1025 Shuts Down While ...
Read More At : www.hivmr.com...

Suggested Questions And Answer :


Installing drivers I just bought the Bushnell imageview 11-1025 and tried to install the drivers. My notebook use Microsoft Vista and I received the message: "not enough storage is available to complete this operation" while I'm sure that I have more than enough storage available. I tried to download also from the internet but cannot find it... Please help me. i've already tried downloading installing drivers.


I need software installing
Read More At : Optics...

Installing drivers I just bought the Bushnell imageview 11-1025 and tried to install the drivers. My notebook use Microsoft Vista and I received the message: "not enough storage is available to complete this operation" while I'm sure that I have more than enough storage available. I tried to download also from the internet but cannot find it... Please help me.


I phoned Bushnell and they told me to buy a new binocular because they weren't going to made drivers for Vista. My binoculars were brand new. It works with XP, but I will never buy anything from Bushnell again.
Read More At : ImageView 111025 Binocular...

Vivitar 10x25 My problem is that when I plug up the camera to usb in keeps popping a box up that says that the usb is not recognized. I have tried it in all my usb plugs on the pc and it says the same thing. It is also saying that their is no driver and I have installed it over and over, I even downloaded it too just in case there was something wrong with my cd.


Try another usb port
Read More At : MAGNACAM Binocular...

Just black Hi I just recently bought a Meade ds-2114ats-tc and I tried to use it last night with the kids, unfortunaltey after we set up the telescope all we could see was black. Yes we did make sure that the lens cap was off and that there was nothing blocking anything, we also tried setting it up in a couple of different spots in the back yard where we were close to a light source and also away from a light source. Basically everything I tried did not work but I am new to this so I could be doing something wrong still. I tried to manually look at the brightest star in the sky and still nothing....just black. Could I be setting this up in an area where there in either not enough light getting in or to much? This is my first time using a telescope so I don't even really know if I should be setting this up in the complete dark area or with a light source around like a backyard light for example. I am extremely confused please help.


I just got one of these today and they are different. My guess is you are having a focusing problem rather than alignment. Assuming of course you are removing the larger dustcap and not just the smaller one ha ha ha. The instructions include how to align but maybe you can use this Mine has two dustcaps, one full size with a smaller one in its center. Had the smaller one been offset it could have been used as an aperture stop to reduce thermal effects on bright objects such as Jupiter and the Moon. Another thing is a built in barlow within the focuser draw tube. This inreases the focal ratio of "f" number and makes align far more trickier than if it had been a straight Newtonian. Set-up the scope under and point at the bright blue sky in the day time. Pull off the small center dust cover and make sure the diagonal holder is centered under the small hole in the larger dust cover. If not that can be accomplished by adjusting the three thumb nuts on the front edge of the tube. Once this is done remove the larger dust cover and peer into the focuser from the side with the eyepiece removed. You should see blue sky and all the components should be centered. One can judge fairly well that their eye is centered but a simple trick is to draw an eyepiece sized circle on a piece of paper and using a pick or pencil, poke a small hole dead center on the circle. Place the circle centered over the draw tube and peer through that. No other tool will improve on the accuracy of this almost free and simple one. Now moving your eye closer to the focuser you should see the reflection of your own eye or in this case the hole in the center of the paper. The paper reflects and transmits enough light that it provides a bright enough targert to canter. Now you must experiment to determine which component is mis-alighned and what adjustment is required to correct. Try flexing each componet before loosening any adjustment screws.This will give you an idea of which component and in which manner it needs to move. Now my guess is, while you have some mis-alignment the almost f:9 focal ratio makes the image extra dark and so contrasty that if you are out of focus all you will see is dark. With your 28mm eyepiece, now point the scope at a daylight scene some distance away and bring the image to a focus. Note hoe far your draw tube is extended so you will be in that neighbohood come night time. I suspect this was your problem more than mis-alignment.
Read More At : DS-2114 ATS (325 x 114mm) Telescope...

I need 2 install a driver for my Bushnell ImageView 111025 4 free


Http://members.driverguide.com/driver/detail.php?driverid=348637that's the link for the XP driver download. There is no vista driver, but you can install this one, then go to the installation folder and right-click on the exe. file and click Properties. Now click Compatibility. There will be a drop down bar where you can choose compatibility for XP, or even right back to win95! obviously choose XP, hit apply and press OK. It may require a reboot. It should now detect and install the device driver and, after a few seconds, the device will be ready to use.good luckchris
Read More At : ImageView 111025 Binocular...

Drivers for Celestron VistaPix 72202 Binocular


Go here http://www.radarsync.com/vista/
Read More At : VistaPix 72202 (10x25) Binocular...

Vivitar Digital 10X25 Camera Binocular driver.


This appears to be EXACTLY the same camera/binoc Bushnell put out. The Binoc isn't too bad, the camera is absolutely lousy and the software is WORSE, WAY WAY WORSE! Bushnell does NOT support it anymore. Calls to the company were not returned. Website has removed the software. I'm pretty good with software and screwed up 2 separate PC's (XP and 2K) before I got it to work on a fresh install of XP_SP3 only to find the test pictures were terrible-completely unusable for any purpose. Don't spend too much time on this POS. fmerk
Read More At : MAGNACAM Binocular...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.opticinfobase.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0608 seconds